Powered By Blogger

Sunday, October 26, 2008

L86A1 - SA-80 Light Support Weapon (Britain)


Caliber: 5.56x45mm NATO
Weight: 7.3 kg empty, with SUSAT optical sight
Length: 900 mm
Length of barrel: 646 mm
Feeding: detachable box magazines, 30 rounds
Rate of fire: 610 - 775 rounds/min

The development of the SA-80 (Small Arms family for 1980s) was started in Britain by the late 1960s, with the search for the "ideal" small-bore ammunition. By the mid-1970s British designers developed a 4.85x49mm cartridge, intended for the SA-80 system, and consequently designed a SA-80 IW rifle and SA-80 LSW light machine gun for this ammunition. The 4.85mm LSW appeared in the prototype form circa 1976, but the NATO trials, held in the 1978-1979, resulted in adoption of the 5.56mm cartridge as a common NATO ammunition, so British designers from the RSAF Enfield redesigned their weapons for 5.56mm NATO rounds. The LSW was based on the SA-80 IW design, which is covered in the Assault Rifles section on this site under the L85A1 topic. The final version of the SA-80 LSW was adopted by the British Army in 1986, and total slightly over the 22 000 LSW weapons were manufactured before the production of both L85 IW and L86 LSW was ceased.

The L86A1 was plagued by the same problems as its sister, L85A1 rifle. In fact, the L86A1 was more suitable as a semi-automatic para-sniper rifle, than the LSW / LMG, due to the poor reliability in full automatic fire, relatively small (by machine guns standards) magazine capacity and the lack of quick detachable barrels.

Current British troops prefer much heavier and belt-fed 7.62mm L7A1 GPMG (a license-built copy of Belgian FN MAG general purpose machine gun), and at the present time the existing stocks of L86A1 are complemented with the 5.56mm FN Minimi belt-fed LMG in the short-barreled Para configuration. The L86A1 will be used mostly as a longer-range aimed fire weapons, while the suppressive fire functions will be conducted using more effective FN Minimi.

Technical description.
General design of the L86A1 is mostly similar to the design of L85A1 rifle, except for the following. The L86A1 has longer barrel, with the steel stock extension under it, that carries the folding bipods. The bolt and trigger system are modified, so the gun can be fired from open bolt. The butt is fitted with folding shoulder support. The vertical grip is attached below the receiver, behind the magazine housing. The L86A1 could not be fitted with bayonet.

--

Heckler-Koch HK MG4 MG 43 machine gun (Germany)



HK MG4 / MG4 E HK MG4 KE
Caliber 5.56x45mm NATO
Weight 8,1 kg (7.9kg MG4 E) 7,7 kg
Length 1030 mm 950 mm
Barrel length 482 mm 402 mm
Feed belt
Rate of fire 880 (770 MG4 E) rounds per minute 770 rounds per minute

The HK MG 43 (this is an original factory designation of the project) is a light, 5.56mm machine gun, developed by famous German company Heckler & Koch as a direct rival to the well-established FN Minimi / M249 SAW LMG. The MG 43 was developed during late 1990s and first appeared circa 2001. It had been type-classified by the Bundeswehr (German Army) in 2003 as the MG4, and by 2007 is already in use as a ground and vehicle gun, gradually replacing older, but more powerful 7,62mm MG3 machine guns in German service. Recently HK has announced that Spain has ordered a slightly modified version of MG4, known as HK MG4 E (Export).
Like the HK G36 assault rifle, the MG-43 is a quantum leap from earlier HK designs, which were based on Vorgrimler-designed, roller delayed blowback actions. MG4 is a conventional, gas operated design, and utilizes all new trends in small arms development, including polymers and accessory interfaces (Picatinny rails).

HK MG4 is a gas operated, belt feed, air cooled automatic weapon. The gas group is located under the barrel and uses a conventional gas piston to operate bolt group. Barrel is locked using typical rotating bolt design. Barrel of the HK MG4 is a quick detachable, and has a folding carrying handle to assist replacement of the hot barrels. The two-pawl belt feed is operated by the roller on the top of the bolt carrier. Belt is fed from separate or clamp-on plastic boxes, from left to right. Spent belt links are ejected to the right, spent cartridge cases are ejected down from the window on the bottom of the receiver.

HK MG4 is fitted with folding bipod, integral to the forend, and has a standard interface for M2-type infantry tripod or vehicle mount. Plastic buttstock can be folded to the left side to save the space, and gun can be fired with the butt folded. HK MG4 is fitted with the Picatinny rail on the top of the receiver, and also is equipped with open sights as a standard. Front sight is mounted on the barrel and can be folded down when not in use. Rear sight is graduated up to 1000 meters, mounted on the Picatinny rail and can be easily detached if not required.

Foldable charging handle is located at the right side of the receiver. Ambidextrous safety switch is located on the pistol grip, and allows only for full automatic fire mode.

--

Heckler und Koch 7,62mm HK 11 / HK 21 and 5,56mm HK 13 / HK 23 machine gun (Germany)


Data for belt-fed machine guns

HK 21E HK 23E
Caliber 7,62x51 mm NATO 5.56x45 mm NATO
Weigth 9.3 kg on bipod 8.7 kg on bipod
Length 1140 mm 1030 mm
Length of barrel 550 mm 450 mm
Feeding box magazine 20 or 30 rounds,
drum 80 rounds or belt 50 or 100 rounds
box magazine 20 or 30 rounds,
drum 100 rounds or belt 50 or 100 rounds
Rate of fire 800 rounds/min 800 rounds/min

In 1961 Heckler&Koch had completed about 1/3 of its first manufacturing contract for the G3 rifle. At this time the HK management decided that it would be worth the investment to develop a universal machine gun which would be as close to the new rifle, in terms of design and maintenance, as possible. The basic action of the new machine gun, which received the company designation HK 21, was similar to that of the G3 rifle. The HK 21 fired from a closed bolt (not that big an issue since its heavy barrel was really quick-detachable) and, unlike most machine guns, its belt feed module was located below the receiver. This made the loading and unloading of the belt somewhat less comfortable than on other weapons, such as the MG 3. On the other hand, it allowed for the easy replacement of the belt feed module with a magazine adapter module, which permitted the use of standard G3 rifle magazines or specially developed 80-round double drums. The new machine gun was on the “light” side of the spectrum, although in its basic version it fired a full-power 7.62x51 NATO ammunition and a variety of tripods and other mountings were offered along with the gun. The HK 21 came too late to be seriously considered by the Bundeswehr, but it was tried and adopted by the Portuguese army, and number of weapons was also bought by other countries, such as Greece, Mexico, Sweden and some others, mostly African and Asian nations.
The HK 21 spawned a whole range of modifications and derivatives. Other than the basic 7.62mm NATO caliber, HK also offered its machine guns in US 5.56x45mm and Soviet 7.62x39 chambering. Early versions in these “additional” calibers also were offered under the designation HK 21, but later on HK adopted a special pattern for numbering, where first digit of model number designated a type of weapon (i.e. 1 – LMG with magazine feed, 2 – GPMG with belt feed, 3 – assault rifle, 5 – submachine gun etc), and second digit designated the caliber (1 – 7.62x51 NATO, 2 – 7.62x39 Soviet, 3 – 5.56x45 US). Therefore, belt fed HK machine guns were offered as HK 21, HK 22 and HK 23. It must be noted that HK never manufactured weapons in 7.62x39 Soviet in any significant numbers, and completely dropped this caliber from its catalogues by the 1980s.
In parallel with belt fed machine guns, HK also developed a number of magazine-fed light machine guns. While those could be classified as “machine rifles”, most of these weapons are actually just conversions of belt-fed guns and, for example, any magazine-fed HK 11E can be converted to a belt-fed HK 21E configuration (assuming that all of the necessary parts are on hand) and vice versa.
One last note must be made concerning HK delayed blowback machine guns in 7.62mm NATO caliber. Those guns were lighter than most rivals (such as the MG 3 or FN MAG), and fired from a closed bolt, thus limiting the maximum effective range and sustained firepower capabilities. On the other hand, the stationary barrel and closed-bolt firing, combined with a selective fire trigger, allowed for very accurate semi-automatic fire. These guns were almost ideal squad automatic weapons: versatile, relatively lightweight and easily operated by one man.
Despite its failure in the US SAW program, HK kept updating its weapons. In about 1981 HK introduced new versions of its machine gun lineup, distinguished by the “E” model suffix, which stood for “Export”. These weapons had longer receivers and barrel jackets, and thus were slightly heavier than their predecessors (especially in 5.56mm versions), and also had a number of other improvements. These weapons sold moderately well, mostly for export, and HK kept manufacturing them until very recently. It seems that HK gradually stopped the production of its roller-delayed machine guns by the early 2000’s, as the current trends on the world small arms market are toward gas operated light machine guns in 5.56mm NATO caliber, such as HK's own MG 4.

All Heckler & Koch machine guns are based on the same delayed blowback action with a stationary barrel. The key differences between the various models of the same period are the feed type (belt or magazine) and the type of cartridge used, although in the “A1” and “E” modifications every gun can be converted from belt to magazine feed with the substitution of the appropriate parts, and HK 21 guns of the earliest make also could change caliber with the replacement of the barrel, bolt and certain parts in the feed. Barrels are quick detachable. A new barrel then can be inserted within a very short period of time.
The roller-retarded bolt system employs a two parts bolt with two rollers. The front bolt part (the bolt head) is relatively light and has a bolt face with an extractor on it. It also has a hollow cavity at the rear, in which the inclined forward end of the rear part of the bolt (bolt body) is inserted. The system features two rollers, inserted from the sides into the bolt head and rested on the inclined forward end of the bolt body. When the gun is fired, the pressure began to move the cartridge back against the bolt face. The rollers, which are extended into the recesses in the barrel extension, began to move inward into the bolt head, due to inclined shape of the recesses. This movement translates into the faster rearward movement of the heavier bolt body, so, at the initial instant of firing when pressure in the chamber is still high, the bolt face moves relatively slowly. As the pressure drops to a reasonable level, the rollers gradually leave the recesses in the barrel extension; as soon as the rollers are completely pushed into the bolt, the bolt head and bolt body begin to move backwards at the same speed, extracting and ejecting the spent case and chambering a fresh cartridge on the way back. Since this system provides no positive initial extraction, the cartridge chamber is fluted to reduce friction.
All HK machine guns fire from a closed bolt. The trigger / hammer units are made integral with the pistol grip, and hinged to the receiver at the front. Early guns had selective fire, with a three position safety / selector lever located above the trigger on the left side of the unit. Later guns added a three-round burst mode to the already available automatic and single-shot modes.
The charging handle is located on the left side of the barrel jacket, and folds forward when not used. It does not reciprocate when the gun is fired, and can be used to lock the bolt back for unloading, change of barrel or inspection.
Late production HK guns use modular feed units, attached to the bottom of the receiver by means of cross-pins. Available feed options are magazine feed or belt feed. The magazine feed unit will accept standard rifle-type magazines developed for HK assault rifles of the same caliber, or specially designed double drums. Belt feed units will accept standard disintegrating or non-disintegrating belts. Belt feed is from left side only. Early belt-fed guns had “unitary” feed modules, with the only way to load or unload the belt being pulling the belt through the unit. With the “A1” configuration, belt feed units were redesigned to accommodate a hinged bottom cover, which can be easily opened for rapid loading or unloading of the belt. The bottom of the belt feed module has a special interface which will accept 100-round (7.62mm) or 200-round (5.56mm) belt boxes.
HK machine guns are fitted with polymer buttstocks and detachable, adjustable, folding bipods. For “assault” missions, a forward vertical grip can be attached to the barrel jacket. Additionally, guns are fitted with a folding carrying handle, located at the center of mass. Other accessories include several types of tripods and vehicle mounts, made by HK and several other companies.

Tuesday, October 21, 2008

XM25 modifikasi dari M14


XM25 Airburst Weapons System

The XM-25 Air Burst Assault Weapon is the air burst portion of the XM29, Integrated Air Burst Weapon. The XM-25 dramatically increases Soldier survivability, standoff and versatility. The air burst weapon provides the Soldier with a 300-500% increase in hit probability to defeat point, area and defilade targets out to approximately 500 meters. The XM-25 weapon includes revolutionary high explosive air bursting munitions and an integrated, multifunctional, all environment, full-solution target acquisition / fire control system. The XM25 25mm Airburst Weapons System provides the infantry soldier with a decisive overmatch capability in a next-generation weapon system that will dramatically increase lethality, range and capability through the use of a family of munitions consisting of thermobaric, high explosive air bursting (HEAB) ammunition.

The XM25 fires 25mm high explosive airbursting (HEAB) munitions. The XM25 incorporates a target acquisition/fire control that integrates thermal, powered direct-view optics, laser rangefinder, compass, fuze setter, ballistic processor, and internal display. The XM25 has a 300-meter range point target and 500-meter range area target capable of defeating defilade (hidden) targets. Spiral development of the XM29 will accelerate fielding of the XM25 subsystem in advance of the dual barrel system. Development of the XM25 will maximize commonality of parts and share the same logistics and supportability resources of the XM29.

The XM25 is equipped with a ballistic computer, thermal sights and zoom capabilities. The XM25 incorporates a target acquisition/fire control that integrates thermal powered direct view optics, laser rangefinder, compass, fuze setter, ballistic processor, and internal display. The XM25 has a 500-meter range against point targets and 500-700-meter range against area targets, and is capable of defeating defilade (hidden) targets.

Ideal for urban combat, the XM25 puts precision firepower in the hands of the Soldier, allows him or her to eliminate threats without causing significant collateral damage. The XM25 fires a High-Explosive (HE), air-bursting 25mm round capable of defeating an enemy behind a wall, inside a building or in a foxhole. Weighing in at less than 12 pounds, the XM25 incorporates a target acquisition fire control that integrates thermal-powered, direct-view optics, laser range-finder, compass, fuse setter, ballistic processor and internal display. As the round flies downrange to the target, it precisely measures the barometric pressure, temperature and velocity of the projectile to a computer chip in the round so that it detonates at exactly the right moment to deliver maximum effectiveness. The XM25 is five times more lethal at the M203 maximum range and continues to provide lethality well beyond the M203's maximum ability, giving Soldiers a 300- to 500-percent increase in hit probability, according to weapon specifications.

The XM25 Assault Weapon is the air burst portion of the XM29, Integrated Air Burst Weapon. The XM25 Air Burst Assault Weapon dramatically increases Soldier survivability, standoff and versatility. The air burst weapon provides the Soldier with a 300-500% increase in hit probability to defeat point, area and defilade targets out to approximately 500 meters. The XM25 weapon includes revolutionary high explosive air bursting munitions and an integrated, multifunctional, all environment, full-solution target acquisition / fire control system. This system supports the Current to Future transition path of the Transformation Campaign Plan (TCP).

Alliant Techsystems (Plymouth, MN) Brashear L3, (Pittsburgh, PA) and Heckler & Koch Gmbh (Oberdorf, Germany) are working in conjunction with PM Soldier Weapons to develop the XM25. The XM25 Air Burst Assault Weapon will reach Milestone B in FY 2005. The System Development and Demonstration (SDD) phase will complete development of the XM25 weapon system and verify training solution for the Milestone C approval in FY 2008.

Saturday, October 11, 2008

Heckler-Koch HK SL-8 rifle (Germany)



Type / action semi-automatic, gas operated rifle
Caliber(s) 5,56x45mm / .223 Remington
Weight unloaded 4,1 kg / 9 lbs
Length 980 - 1030 mm / 38,6-40,5"
Barrel length 510 mm / 20,1"
Magazine capacity 10 or 30 rounds

Friday, October 10, 2008

Beretta moldes 81, 82, 84, 85, 86, 87, 89 (Italy)






Type: Double Action (models 87 and 89 - Single Action)
Chamber: .22LR (5.6mm) models 87 and 89; 7.65x17mm (.32ACP) models 81 and 82; 9x17mm Short (.380 ACP) models 84, 85 and 86
Weight unloaded: 570 - 680 g depending on model
Length: 172 mm
Barrel length: 97 mm
Capacity: 7 (model 87), 8 (models 82, 85, 86, 89), 12 (model 81), 13 (model 84) rounds

New generation of the compact pistols from famous Italian company Pietro Beretta appeared in 1976, with introduction of the models 81, 82, 84 and, later, 85. These models were similar in appearance, major dimensions and design, and differed only in calibers and magazine capacities. Models 81 and 82 were chambered for 7.62x17mm Browning cartridge, also known as .32ACP. Models 84 and 85 were chambered for 9x17mm Browning Short, also known as .380ACP. Models 81 and 84 had double-stack, high capacity magazines, while models 82 and 85 had single-stack magazines and thinner grips. During the following decades, these models passed some upgrades and currently manufactured in FS modifications, easily distinguishable from earlier versions by reshaped triggerguards, styled after famous Beretta 92FS combatt pistol. During the same period some internal alterations also were made. Later, in 1986, Beretta added another pistol to this line, a model 86. Being similar to model 85 in almost all aspects, Beretta 86 has redesigned front part of the frame and added a tip-up barrel. This means that the barrel is hinged to the frame under the muzzle, and rear part of the barrel can be tipped up for visual inspection, clearing, manual unloading and loading directly into the chamber. Latter is an essential thing for those who cannot cycle the slide manually, due to weak, or wet hands, for example. Beretta now marketed these guns under the common name "Cheetah".

This family also includes two rimfire pistols, intended mostly for plinking and target shooting. Model 87 is similar in appearance to other models but has single-stack magazine and available with snandard lenght or with extended barrel. Model 89 is a target pistol, with extended, heavy barrel and light slide. Model 89 is equipped with ajustable rear sights and has a scope rail on the top of the barrel jacket. Both Model 87 and Model 89 featured single action triggers.

In general, all these pistols are blowback operated, hammer fired guns. Ambidextrous safety is mounted on the frame and disconnects the trigger from the sear and locks the slide when engaged. Slides are of familiar Beretta opent-top pattern, and overall shape of these guns is very similar to famous Beretta 92 pistol. Frames are made from ligh alloy, slides are steel. All centerfire pistols of this family featured fixed sights, dovetailed into the slide. These guns can be found in blued or nickel finish, with plastick or wooden grip panels.

Modifications:
Modifications are marked with suffixes after the model number, such as model 82BB or model 84FS.

BB models. This was first modification of the whole line. All BB-marked models have the following additional features: loaded chamber indicator; automated firing pin safety; hammer half-cock position.

FS models. These are the latest (current) versions of the breed. FH models have safety coupled with decocker device, so, when safety is applied, hammer drops automatically against the interceptor, and then slide and sear are locked. Triggerguard of all FS models is reshaped for better two-hands grip and patterned after the Beretta 92FS / US M9 pistol.

Glock family of handguns (Austria)



The Glock family of pistols, once started by famous Glock 17 pistol, was developed by Austrian company Glock Gmbh., previously known for quality knives and entrenching tools. The Glock 17 pistol first appeared at the Austrian Army trials, won it and was adopted by Austrai Army and Police in the early 1980s under the designation of P-80. Since then, the Glock 17 and its descentants become very popular military and law enforcement firearms, being exported in more than 50 countries. Currently, Glocks are chambered in all major pistol calibers, namely 9x17mm Short (.380ACP), 9x19mm Luger, .357SIG, .40SW, 10mm auto and .45ACP. Also, Glocks available in full-size service models, semi-compact models, compact models for concealed/backup carry, and in longslide competition models. Training versions, firing non-lethal practice ammo, also available. Training versions are distinguished from "live" ones by frame colour - blue frame for guns that fire non-lethal ammunition and red frame - for non-firing guns.

All Glocks (except for ones chambered in 9x17 - .380ACP) are recoil operated, locked breech pistols. Glocks feature Browning-type linkless locking system with barrel interlocking with slide via ejection port. All Glocks feature patented "Safe action" striker-fired trigger mechanism. After the each cycle of the slide the striker is set to half-cock position and is safely blocked by internal safety. When shooter pulls the trigger, he disengades the trigger safety first, then cocks the striker to the full-cock and then fires the gun. This results in constant trigger pull (ajustable from 2 to 5.5 kg) and, unlike the traditional DA or DAO pistols, unavailability of the "second strike" option in case of the misfire. All Glocks has no external controls except the trigger and the slide stop (the only different is Glock 18, which has slide mounted fire mode selector).

The .380ACP / 9x17mm Short chambered Glocks (models 25 and 28) differs from the rest of the Glock family by operating by simple blowback principle. These pistols targeted for civilian markets where ownership of the firearms chambered in "military" calibers is prohibited, or for those shooters who can't withstand more severe recoil of the "bigger" calibers.

All Glocks feature polymer frame, steel slides made by precision moulding process and had Tenifer heat-threatment to increase rust and wear risistance. early Glocks had plain grips with slight serrations. Modern variants has finger grooves on the front strap of the grip, and ambidextrous thumb rests. Also, modern versions featured underbarrel acessory rails. Barrels has hexagonal rifling in all calibers. Both front and rear sights are dovetailed and usually had white or luminous inserts. Ajustable sights are available for competition models.

Almost all models had modifications with factory-ported barrels. These models are marked with suffix "C" after the model number, i.e. Glock 17C.

The Glock 17 (and only model 17) could be modified with "amphibious kit" that allows underwater firing (in wery shallow depths, thought). Basically, the underwater shooting itself has wery little effect in real combat, since the effective range is extermely short. The real purpose of that feature is to show the strenght of the gun and to allow safe shoting in severe weather conditions, with possible water in the barrel (in many guns this may result in blown barrel).

The select-fire version of the Glock, called Glock 18, available only in 9mm Luger and only for Military / Law enforcement sales. Glock 18 could fire single shots or three-shot bursts. Glock 18 may be equipped with 31-rounds extended magazines and after-market folding stocks. For security reasons, some parts of the Glock 18 ARE NOT interchangeable with Glock 17/19 pistols. The theoretical rate of fire in full-auto mode is 1200 rounds per minute.